AFD-2000 50g Anaerobic surface sealer green

£17.99

AFD 2000 is a solvent-free, low-viscosity sealing compound.

It is ideal for sealing torsion-resistant metal parts with a level,

plane sealing face, for example on housings and bearing

covers or on flanges used in engines, transmissions and mechanical

equipment. A sealing film, resistant to chemicals

and temperature variations, forms and cures without air by

making metal contact between the two parts that must be

joined. The parts can nevertheless be separated again easily.

Unlike with conventional flat gasket materials, none of the

bolt force is lost as a result of the material “settling” when

direct contact is made between metallic surfaces. Pressures up

to approximately 5 bar are reliably sealed immediately after

assembly. The maximum pressure tightness is achieved after

around 24 hours when the sealant is fully cured.

Clean and degrease the sealing surfaces with spirit or similar

solvent. Apply AFD 2000 to the complete sealing surface on

one side by squeezing the plastic bellows bottle, then fit the

two parts together. There is no need to allow any drying time.

The sealing effect is instant. The degree of curing depends

on the gap width.